Home
Technical Program
Author Center
Meeting Information
Help
Login
 

FIRST TIME USERS
to the ASME Itinerary Planner
ASME Itinerary Planner
Technical Program Overview
Conference Schedule
Student Registration Support
Plenary Speakers
Author Resources
Publication Schedule
Chair

General Information Website

Have questions?
Contact us.


Acceptance notification, technical content, etc.
NAMRI/SME Scientific Committee Chair

Website support
toolboxhelp@asme.org
 
View Accepted Abstracts
Select Topic

Abstracts Accepted (Current Count: 94)

Paper No. Title

NAMRC40-7701  

Development of Hole Making Apparatus Based on Double Eccentric Mechanism and its Capability in the Case of Bi-Layer Composite Materials Consisting of CFRP Laminates and Titanium Alloys

NAMRC40-7702  

Characterization of Surfaces Produced by Abrasive Flow Machining Under Magnetic Field Assistance

NAMRC40-7703  

Spindle Speed Selection for Tool Life Testing using Bayesian Inference

NAMRC40-7704  

Energy Consumption in Single Point Incremental Forming

NAMRC40-7705  

Optimization of the Design of Roll-Formers

NAMRC40-7706  

The Development of a Simple Method for Micro Strain Measurement Applied to Bulge Microhydroforming

NAMRC40-7707  

Feasibility of Vegetable Oil in Water Emulsion Achieved Through Ultrasonic Atomization as Cutting Fluids

NAMRC40-7709  

Evaluation of Environmentally Friendly Lubricant for Aluminum Cold Forging Using Friction Test Based on Spline Extrusion

NAMRC40-7710  

Optimum Part Orientation In Rapid Protopyping Using Genetic Algorithm

NAMRC40-7711  

Printed Energy Storage: From Prototype Towards Large-Scale Manufacturing

NAMRC40-7712  

An Assessment of Environmentally Benign Lubricants With the Ring Test and Upset Forming

NAMRC40-7714  

A Case for 2-Body Material Removal in Prime LED Sapphire Substrate Lapping and Polishing

NAMRC40-7715  

Smooth Surface Fabrication in Mask Projection Based Stereolithography

NAMRC40-7717  

On the Choice of Tool Material in Friction Stir Welding of Titanium Alloys

NAMRC40-7718  

Analysis of Orthogonal Cutting Experiments Using Diamond-Coated Tools With Force and Temperature Measurements

NAMRC40-7720  

PVD Coated Mill Rolls for Cold Rolling of Stainless Steel Strips: Tribological and Mechanical Laboratory Tests

NAMRC40-7723  

Hierarchical Decomposition Based Approach to Process Design of Aeroengine Disk in Presence of Defects

NAMRC40-7724  

Comparison of Different Approaches to Force Controlled Precision Honing of Bores

NAMRC40-7725  

A Combined Experimental Simulative Method for Studying the Material Bonding of Different Aluminum Alloys

NAMRC40-7727  

Algorithm for Tool Geometry Updating in 3D FEM Environment Considering the Tool Wear

NAMRC40-7728  

Flatness Defects in Thin Strip Cold Rolling and the Friction Impact On It

NAMRC40-7731  

Highly-Efficient Polishing Technology for Glass Substrates Using Tribo-Chemical Polishing With Electrically Controlled Slurry

NAMRC40-7732  

Influences of Clamp Die Geometry and Friction on the Clamping Process in Rotary Draw Bending

NAMRC40-7734  

Effect of Green Machining on Distortion and Surface Finishing in Advanced Ceramic

NAMRC40-7735  

Application of Axiomatic Design Principles to Identify More Sustainable Strategies for Grinding

NAMRC40-7736  

Advances in Predicting Damage Evolution and Fracture Occurrence in Metal Forming Operations

NAMRC40-7737  

Ultrasonic Vibration Assisted Nanomachining on PMMA with an AFM

NAMRC40-7738  

Process Energy Analysis and Optimization in Selective Laser Sintering

NAMRC40-7740  

Effects of Process Conditions on Nano-Dot Array Formation by Thermal Dewetting

NAMRC40-7741  

A Combined Dynamic Programming / Finite Element Approach for the Analysis and Optimization of Multi-Stage Deep Drawing of Box-Shaped Parts

NAMRC40-7742  

Multi-Material Fabrication of Tissue Engineering Scaffold

NAMRC40-7743  

A Study on Optimal Machine Setups Using an Energy Modeling Approach

NAMRC40-7744  

Updated Mechanistic Force Model to Account for Rapid Tool Wear when Milling Nickel-Based Superalloys

NAMRC40-7745  

Finite Element Modeling and Simulation of Micro-Milling

NAMRC40-7746  

Nanosecond Pulsed Laser Micro-Machining of PMMA-Based Microfluidic Channels

NAMRC40-7749  

Parametric Glass Milling With Simultaneous Control

NAMRC40-7750  

Effect of Machining on Tensile Strength of Composite Laminates

NAMRC40-7753  

Investigation of the Fishtail Defect in RING ROLLING by a FEM Approach

NAMRC40-7755  

Size Effect and Ductile-to-Brittle Transition of Annealed AISI D2 Steel by SHPB Test of Hat-Shaped Specimen

NAMRC40-7756  

Recent Developments in Non-Conventional Tube Forming

NAMRC40-7757  

Orthogonal Cutting of AISI D2 Steel With TiAlN Coated Inserts: Simulations and Experiments

NAMRC40-7758  

Process Damping Analytical Stability Analysis and Validation

NAMRC40-7759  

Experimental Study of Conventional and Peck Drilling Operations

NAMRC40-7760  

Embedding Shape Memory Allow Actuators in Miniature Articulating Polymer Structures Using In-Mold Assembly

NAMRC40-7761  

Analytical Prediction of Stepped Feature Generation in Multi-Pass Single Point Incremental Forming

NAMRC40-7764  

White Layer Thickness Formation in Electro Discharge Machining of Beryllium-Copper Alloys

NAMRC40-7765  

Finite Element Modeling of Microstructural Changes in Turning of AA7075-T651 Alloy and Validation

NAMRC40-7766  

The Effect of Overlap Percentage on Surface Quality in Laser Polishing of AISI H13 Tool Steel

NAMRC40-7767  

Mapping Microstructures From Severe Plastic Deformation in Machining

NAMRC40-7768  

Chip Morphology Characteristics During Dry Drilling of Austempered Ductile Iron (ADI)

NAMRC40-7769  

Springback Prediction in Bending of AHSS-DP 780

NAMRC40-7770  

Improvement of Tool Life and Production Efficiency in Continuous Grain Flow Forging of Diesel Engine Crankshafts

NAMRC40-7771  

Tool Wear of Ultra-Hard Coatings in Drilling CFRP

NAMRC40-7772  

New Developments in the FE Simulation of Closed Die Forging Processes

NAMRC40-7773  

A Novel Design of Parallel Compliant Micro-Motion Stages With Kinematotropic Properties

NAMRC40-7774  

Predictive Modeling for Glass-Side Laser Scribing of Thin Film Photovoltaic Cells

NAMRC40-7775  

Investigations in Subsurface Damage When Machining Nickel-Based Superalloys

NAMRC40-7777  

Effect of Applied Load, Cutting Speed and Laser Power on the Material Deformation and Removal of Semiconductors

NAMRC40-7779  

"Energy Dissipation, Microstructure and Hardening in Cryogenic Machining"

NAMRC40-7780  

Ball End Milling Mechanistic Model Based on a Voxel-Based Geometric Representation and a Ray Casting Technique

NAMRC40-7781  

Performance Validation of a Micro Quick-Stop Device

NAMRC40-7783  

Machining Assessment of Nano-Crystalline Hydroxyapatite Bio-Ceramic

NAMRC40-7784  

Joint Dynamics Modeling and Identification

NAMRC40-7785  

Investigation of the Efficiency of Joint Designs for the Electro-Magnetic Welding (EMW) of the Ring-Shaft Assembly

NAMRC40-7787  

Flexibility in Manufacturing Automation: A Living Lab Case Study of Norwegian Metalcasting SMEs

NAMRC40-7789  

Experimental Investigation and Characterization of Nano-Scale Dry Electro-Machining

NAMRC40-7790  

Multi-Sensor Data Fusion in Surface and Dimensional Metrology Domains

NAMRC40-7791  

Towards Control of Carbon Nanotube Synthesis Process Using Prediction-Based Fast Monte Carlo Simulations

NAMRC40-7792  

Micro Fabrication on Cylinder Surface for Control of Wettability

NAMRC40-7793  

Effect of Specimen Planar Area on Electromagnetic Flanging

NAMRC40-7795  

Investigation of Carbon Nanotube (CNT) Nanocomposites Through Micro Scribing and Indentations

NAMRC40-7796  

Influence of Process Variables on Preform Design for Tube Hydroforming Based on Wrinkle Evolution

NAMRC40-7797  

Design and Evaluation of an Atomization-Based Cutting Fluid Spray System in Turning of Titanium Alloy

NAMRC40-7798  

An Evaluation Into the Cause of Corrosive Failure in Autophoretic Coated Material

NAMRC40-7799  

Selective Welding Reinforcement Within Three-Dimensional Fabrics

NAMRC40-7800  

Integration of Economic and Environmental Considerations Into Process Selection and Planning

NAMRC40-7803  

Perspirable Skin: Thermal Buckling Achieved by Complex Functionally Graded Materials

NAMRC40-7804  

Current Envelope Analysis for Defect Identification and Diagnosis in Induction Motors

NAMRC40-7806  

Deformation of OFHC Copper During Cutting

NAMRC40-7807  

The Effect of Pitting Corrosion on Split Sleeve Cold Hole Expanded: Bare 7075-T651 Aluminium Alloy

NAMRC40-7811  

A Prototype Printer for Laser Driven Micro-Transfer Printing

NAMRC40-7813  

Stringer Sheet Forming

NAMRC40-7814  

Simulative Testing of Friction and Lubrication in Cold Forging of Steel and Aluminum

NAMRC40-7815  

Single Step Channeling in Glass Interior by Femtosecond Laser

NAMRC40-7816  

Inertia Welding for Assembly of Copper Squirrel Cages for Electric Motors

NAMRC40-7819  

Deflection for a Magnetostrictive Thin Film Bimorph in a Magnetic Field

NAMRC40-7820  

Hermetic Joining of 316L Stainless Steel Using a Patterned Nickel Nanoparticle Interlayer

NAMRC40-7822  

Failure Analysis of Hydroforming of Sandwich Panels

NAMRC40-7823  

Applying Axiomatic Design to Orthogonal Metal Cutting Generates a New Shear Strain Equation

NAMRC40-7824  

Damage Diagnosis and Fixture Classification Using Impedance-Based Sensors

NAMRC40-7825  

Improved Reduced Order Modeling of Machine Tool Structures

NAMRC40-7826  

Simulations and Experiments in Punching Spring-Steel Devices With Sub-Millimiter Features

NAMRC40-7827  

Modeling Machining Distortion Using the Finite Element Method: Application to Engine Disk

NAMRC40-7828  

New Developments in Sheet Metal Forming of Stainless Steel: Current Investigations and Future Challenges

  Sponsored By

Hosted By


 

Media Sponsors

Mechanical Engineering Magazine    
 
Minimum Site Requirements: IE 6.0+ Firefox 2.0+ Chrome 4.0+ Acrobat Reader 4.0+
Minimum Site Requirements: IE 6.0+Firefox 2.0+Chrome 4.0+

Copyright © 1996-2014 ASME. All Rights Reserved. Terms of Use | Privacy Statement
Powered by Conference Toolbox ™ version 4.0. For more information, contact us.